Teledyne First Responder CG, User Handbook Manual, Page: 95 / 104

C-11
APPLICATIONS FIRST RESPONDER CG - USER HANDBOOK
Stainless Steel (Flue) Probe
This probe is also available as an accessory.
Fig. C-8 Flue Probe
When a flue sample is required, a Stainless Steel open ended
probe (Part No. 13413) with Coalescing Filter Assembly
(Part No. 42215), incorporating Coalescing Filter (Part No.
75174), is generally used. The purpose of the filter assembly
is to isolate any moisture which could affect the sample
reading. The flue probe and coalescing filter assembly is
generally used with the Probe Handle Assembly (Part No.
12481), incorporating both Cotton and Hydrophobic Filters,
to prevent the ingress of dirt. The Sample Line (Part No.
12712) connects the probe handle to the instrument and
allows the pump to draw the sample into the instrument
analysing chamber.