Teledyne First Responder CG, User Handbook Manual, Page: 62 / 104

5-10
OPERATOR MAINTENANCE FIRST RESPONDER CG - USER HANDBOOK
In-line Dust Filter (Accessory)
To replace the Dust Filter in the Dust Filter Housing assembly,
proceed as follows:
1. Unscrew the filter housing assembly (Figure 5-10).
Probe Sealing Washer Dust Filter
Probe Washer
Dust Filter Housing Assembly
Fig. 5-10 Dust Filter Assembly
2. Remove Dust Filter, then discard.
3. Check Probe Washer and Probe Sealing Washer for
signs of damage or wear and replace if necessary.
4. Fit new Dust Filter.
5. Reassemble the Filter Housing assembly.