Teledyne Everywhereyoulook T3AWG3K-C Series Programming Manual Download Page 40

Page: 40 / 152

Programming Manual

–

T3AWG3K-C Series Arbitrary Waveform Generator

True-Arb Operating Mode

Command

Description

WLISt:SIZE?

Returns the size of the
waveform list.

WLISt:WAVeform:DATA?

Transfers waveform data of a
waveform in waveform list to
the external control program.

WLISt:WAVeform:DELete

Deletes a waveform from the
waveform list or all imported
waveforms.

WLISt:WAVeform:IMPort

Imports a waveform from
internal driver or USB driver into
the waveform list.

WLISt:WAVeform:LENGth?

Returns the size of the specified
waveform in the waveform list.

WLISt:WAVeform:LMAXimum?

Returns the maximum number
of waveform sample points
allowed.

WLISt:WAVeform:LMINimum?

Returns the minimum number of
waveform

sample

points

required for a valid waveform.

WLISt:WAVeform:PREDeﬁned?

Returns true or false based on
whether the waveform is

predeﬁned (already present in

waveform list by default).

WLISt:WAVeform:TYPE?

Returns the type of the
waveform (analog or digital).

Table 28: Waveform group commands

2.9.16

Multi Instrument Commands

Use the following commands to synchronize multiple instrument.
The multi instrument synchronization is available on 8 channel models only.

Command

Description

MIM:CAPTure

This command captures all
slave instruments

MIM:ID?

This command returns the
identification number of the

Summary of Contents for Everywhereyoulook T3AWG3K-C Series

























































































































































Search results

Summary of Contents for Everywhereyoulook T3AWG3K-C Series

Reviews:

Teledyne Everywhereyoulook T3AWG3K-C Series, Programming Manual, Page: 40 / 152

Search results

Summary of Contents for Everywhereyoulook T3AWG3K-C Series

Reviews: