Use and disclosure shall be in accordance with the proprietary information notice and DCS on page i.
UG2243800-4XX
May 28, 2019
P a g e
|
18
Front Panel Display
The blue backlit front panel display has two lines with 16 characters each and
shows the operational status of the unit. Figures 4 and 5 show normal post-
boot-up status when Run-Control is in use and when not in use.
Figure 4
–
Typical WQAR Display (Run Control Feature in Use)
Figure 5
–
Typical WQAR Display (Run Control Feature not in Use)
Figures 6 shows a display example of flight data is coming in when it is out-of-
sync (NoSync). When the WQAR is configured properly, the NoSync condition
is temporary and, after a few seconds, will display what is shown in Figure 7.
During this time, data is recorded but it will appear invalid during analysis.
Figure 6
–
WQAR Display (Data out of Sync)
RawIn:NoSync
R_On
:
:IOff
R_On
:
:IOff
RUN DISABLED
R_On
:
:IOff