Teledyne 200A, Instruction Manual, Page: 45 / 220

Teledyne API Model 200A NO
X
Analyzer Instruction Manual, 02246, Rev. F1
5.1.2 Set-Up Menu
Table 5-2: M200A Setup Menu Structure
Setup Menu #1
Level 1 Level 2 Level 3 Level 4 Description
Reference
Section
CFG CFG is primarily used for
showing special
configuration options and
factory special software 5.3.1
PREV,
NEXT, LIST
PREV, NEXT can be used to
scroll through the
configuration list. LIST
automatically scrolls the list 5.3.1
AUTOCA
L Automatic span check or
calibration 5.3.2, 6.4
SEQUENCE Selects Sequence 5.3.2, 6.4
PREV-
NEXT
Scrolls display to select
calibration sequence 1, 2, or
3 5.3.2, 6.4
MODE Selects mode of calibration
(zero, span, zero-span) plus
disable 5.3.2, 6.4
SET For a given Sequence and
Mode, sets timing and
calibration attributes 5.3.2, 6.4
DAS Data Acquisition
System(DAS) - keeps 1 to
1500 minute averages of data
5.3.3
VIEW Select which DAS data
collector to view 5.3.3
PREV-
NEXT
Scroll through data collectors
CONC, PNUMTC, CAL
DAT. The DAS data
structure can be viewed as a
list with the most recent data
at the top. The pointer is
initialized at the top - the
most recent entry. 5.3.3
EDIT PREV Move down the DAS data
buffer to examine older data 5.3.3
PREV10 Move down 10 entries in the
DAS data buffer 5.3.3
NEXT Move up the DAS data buffer
to display more recent data 5.3.3
NEXT10 Move up 10 entries in the
DAS data buffer 5.3.3
5-5