Teledyne 200A, Instruction Manual, Page: 127 / 220

Teledy ne API Model 200A NO
X
Analyzer Instruction Manual, 02246, Rev. F1
8-1
8.1 Maintenance Schedule
8 MAINTENANCE
Item Maintenance Interval Reference Section
TEST Functions 6 - 12 month intervals Table 9-1
Zero/Span Calibration Annually or after repairs Section 7
Zero/Span Checks Daily Section 7, Table 6-2
Particulate Filter Weekly as needed Figure 8-1
Ozone Scrubber on Pump Pack Replace charcoal every 3 months Section 4.2.7, Figure 4-2
Filter for Ozone Scrubber Replace every 12 months Figure 4-2
Filter for PermaPure Drier Replace every 12 months Figure 9-7
Zero Air Canister Refill every 3 months Section 8.5
Reaction Cell Window Clean annually or as necessary Section 9.3.8, Figure 8-3
Ozone Flow Check every year Figure 9-9, Section 9.3.7
Sample Flow Check every year Figure 9-9, Section 9.3.7
Moly Converter Check efficiency every 6 months Figure 8-2, Section 8.6
Pneumatic Lines Examine every 12 months, clean
if necessary Figure 8-4, Figure 8-5,
Figure 8-6
Factory Calibration Calibrate each year or after
repairs Section 9.1.6
Leak Check Check every year Section 8.9
O-rings Replace if seal is broken Figure 9-9, Figure 9-10
Table 8-1: Preventative Maintenance Schedule
NOTE
The operations outlined in this chapter are to be
performed by qualified maintenance personnel only.