WorkHorse Rio Grande ADCP User's Guide
P/N 957-6167-00 (January 2001)
page 17
f. If the calibration procedure is successful, it records the new calibration
matrix to nonvolatile memory. The WorkHorse will not change its ma-
trix unless the calibration is properly carried out.
g. If the calibration procedure is not successful, return your WorkHorse to
the original factory calibration, by using the AR-command. Try using
the AR-command if you have trouble calibrating your compass. In
some circumstances, a defective compass calibration matrix can prevent
proper calibration.
Place the Dummy Plug or small block under the end-cap
to make the tilt less than or equal to 20 degrees.
UPWARD DEPLOYMENT
DOWNWARD DEPLOYMENT
Tilt 10 to 20 deg
Figure 6.
Compass Alignment
Summary of Contents for WorkHorse Rio Grande ADCP
Page 2: ......
