Sentinel V SC and RT Operation Manual
September
2017
EAR-Controlled Technology Subject to Restrictions Contained on the Cover Page.
Page 65
Using the Download Data Panel
Use the Download Data panel to check the status of data files, recover data, and erase the recorder. To se-
lect a data file, click on it. Click on the
Step 3: Download data
panel to open the Recorder panel as shown
below.
Figure 18.
Download Data Panel
If there are 50 or more data files on the recorder, it is best to download and then delete the
files before deploying the ADCP.
Status
– Closed or Recording. To close a file, click Stop (see
Starting or Stopping Deployments
).
If a data file status is recording, the Delete and Download buttons do not appear.
Name
– Shows the file name.
Size
– Shows the file size.
Start Date
– Shows the date and time the data file was created.
Stop Date
– Shows the date and time the data file was closed.
