Sentinel V Real-Time Quick Start Card
Ethernet
95D-6030-00 (September 2017)
EAR-Controlled Technology Subject to Restrictions Contained on the Cover Page.
Connecting to the ADCP
Connect Cable
Sentinel V RT Utilities
Connect the ADCP to the Ethernet port on the laptop.
Connect the AC power adapter to cable and to an AC power
source.
You should hear one long beep, a ~15 second delay and then
two short beeps.
Enter the
IP or host name
. For example, Sentinel V ADCPs
host name is SV
nnnnn.adcp
(where
nnnnn
is the five or six
character serial number shown on the product label).
Use SV
nnnnn
if the network you are connecting to assigns
the IP address.
Enter the
Port Number
9000.
Select
TCP
.
Click the
Connect
button.
Beep(s) heard.
If the beep(s) are not heard, check the AC power adapter
voltage.
Check all cable connections are fully seated.
For more information on
Sentinel V RT Utilities
, click the Help
icon ( ) to open the Sentinel V RT Utilities software help
file.
Continue to the Sentinel V Real-Time Deployment Guide for step-by-step instructions on how to deploy, recover data,
and view Real-Time Sentinel V data. See the Sentinel V Operation Manual, Chapter 1a Using Ethernet
Communications to see how to view RT data over the ethernet.
