TELEDYNE OLDHAM SIMTRONICS Everywhereyoulook DG-TT7-S, Operating Manual

Page: 49 / 72

MULTITOX DETECTOR
OPERATING MANUAL
NOSP17668
Revision 03
a
43
The label or zone modification must be confirmed by pressing the key VALID, otherwise the
modification is not taken into account
For a network detector, the configuration data’s (label, zone and
alarms) cannot be modified.
6.8.6 [SORT] Output configuration sub-menu
6.8.6.1 Relays configuration
This menu gives access to the configuration of the relay operating mode and to conditions of
activations.
This menu is available only with the optional relay card
State of the relays:
Each relay can be configured:
•
Normally not energized
•
Normally energized.
Activation of the relays:
Each relay can be activated on one or several following conditions:
•
Alarm
•
Fault
•
Inhibition
Factory setting:
•
Relay 1: normally energized, activated by any fault or inhibition
•
Relay 2: normally not energized, activated on alarm levels
•
Relay 3: normally not energized, activated on alarm levels