TELEDYNE OLDHAM SIMTRONICS Everywhereyoulook DG-TT7-S, Operating Manual

Page: 10 / 72

MULTITOX DETECTOR
OPERATING MANUAL
4 NOSP17668
Revision 03
a
1.7 Detection cartridge
Detection cartridges are:
•
Intrinsic safety “ia” for the DGi-TT7-E- and DGi-TT7-O versions. They can be removed
when the detector is powered.
•
Explosion proof “d” for the DG-TT7-S versions. They cannot be removed when the
detector is powered.
They are common to all TELEDYNE OLDHAM SIMTRONICS MultiTox products in order to reduce
the number of spares parts.
•
DGi-RT7-E / DGi-RT7-O et DG-RT7-S: Network versions for Syntel loop,
•
DGi-TT7-E / DGi-TT7-O et DG-TT7-S: « Telecapteur » versions,
Storing electrochemical cartridges (green or blue label) for long periods is not
recommended, as their lifetime is short. Cartridges should be used within 6 months (from
the date of purchase).
In order to guarantee the metrological characteristics of the device, the cartridges must be stored
in their original packaging until commissioning and in clean atmosphere (no vapor of solvant).
For a long-term storage, the cartridges will be stored in a dry place, between 5°C and 20°C.
After a long storage period, more than one month, the cartridge will be stabilized for several
hours, in order to perform the nominal characteristics.
1.8 Commnication Interface
1.8.1 Wireless Configuration Tool
Information and status of the detector are available via the wireless configuration tool TLU600.
Configuration and tests are performed using this wireless configuration tool (IrDA protocol). This
tool is common for all TELEDYNE OLDHAM SIMTRONICS MultiFlame, MultiXplo and MultiTox
products.
The TLU600 provides access to devices that, otherwise, would require
major logistic operations for maintenance or for configuration
(calibration…).
For more details, please refer to the wireless configuration tool operating
manual.