TELEDYNE OLDHAM SIMTRONICS Everywhereyoulook DG-TT7-K, Operating Manual

Page: 57 / 72

MULTIXPLO AND MULTITOX DETECTORS
OPERATING MANUAL
NOSP17665
Revision 02a
51
8 ATEX / IECEx Marking
The detector identification label is placed on the main housing, according to ATEX directives ATEX
2014/34/UE
•
Constructor: TELEDYNE OLDHAM SIMTRONICS
•
Model: DG-TX7…
DG-TT7…
•
Serial Number: S/N: xxxxxxxxx (xxxxaamm)
•
Type of certification: CE0080 II2G / Ex db IIC T6 Gb
CE0080 II2G / Ex db IIB T6 Gb
(2 mm > Paint thickness > 200
μ
m)
version : DG-T*7-****-***-**-*L*-*-*-*)
-40°C < Ta < + 65°C
-20°C < Ta < + 60°C (external probe version)
•
Certificate number: ATEX: LCIE 11 ATEX 3081X
IECEx: LCI 11.0060X
•
External probe SX202 LCIE 03 ATEX 6258 / -20°C < Ta < 60°C
•
Standard product reference EN 60079-29-1 : INERIS 11ATEX0033 (DG-TX7-X)
(External probe version excluded)
•
Warnings: Warning - Do not open when energized. After de-
energizing, delay 2 minutes before opening.
•
Ingress rate: IP66 *
•
Maximum power supply voltage 35 Vdc
•
Maximum consumption 5 W
* IP rating does not mean that the equipment will detect the gas during or after exposure to the
defined conditions.
It is also recommended to use the device with the following accessories: AS056-250, AS019,
AS015.
TELEDYNE OLDHAM SIMTRONICS does not allow any repairs of the flameproof
joints and shall not be responsible for any modification of material.