TELEDYNE OLDHAM SIMTRONICS Everywhereyoulook DG-TT7-K, Operating Manual

Page: 42 / 72

MULTIXPLO AND MULTITOX DETECTORS
OPERATING MANUAL
36 NOSP17665
Revision 02a
6.7 Information menu [INFO]
The information menu contains all information concerning the identity and settings of the detector.
The first screen gives the detector’s reference and its serial number.
6.7.1 [IDEN]tity submenu
Presentation of:
•
The serial number
•
The device reference
•
The scale and the targeted gas
Sub-menus present the board software version, the power supply voltage and the temperature
read in the cartridge.
6.7.2 [OUT]put submenu
Presentation of:
•
Analogue output current type (0-20 mA or 4-20 mA).
•
Normal state of the relays (normally open or normally closed).
•
Condition of relays activation.
Relays can be set with a level 2 access.
6.7.3 [STAT]e Information submenu
Presentation of:
•
Number and value of activated levels.
•
List of eventual faults (press F1 key to scroll through the list)
•
Possibility to acknowledge alarms
•
Possibility to acknowledge ambiguity (DG-TX7)
6.7.3.1 [ALRM] Alarm screen
Allows setting of levels and alarms acknowledgement.
6.7.3.2 [FLT.] Fault screen
Displays a list of eventual faults (press F1 key to scroll through the list) and allows their
acknowledgment.
6.7.3.3 Network Screen Switch
This menu and its sub-menus are used for the network detector settings. For any further details,
please refer to the Syntel system operating manuals.