Teledyne Lecroy WaveSurfer 3000 Operator'S Manual Download Page 87 | Manualshive

Page: 87 / 97

Teledyne Lecroy WaveSurfer 3000 Operator'S Manual Download Page 87

Operator's Manual

LabNotebook

Teledyne LeCroy's LabNotebook feature extends the documentation capabilities of your oscilloscope. It allows you to
create and save Notebook Entries containing all displayed waveforms, the oscilloscope setup under which they were
taken, and custom annotations.

Notebook Entries are stored in an internal database and are available for recall at any time. Besides storing the waveform
data, LabNotebook also stores your panel setups and parameter measurements. You can back up this database to
external media for indefinite storage of waveform data.

The Flashback Recall feature instantly recalls the setups stored with individual Notebook Entries, enabling you to restore
the exact state of the oscilloscope at a later date to perform additional analysis.

Create Notebook Entry

A Notebook Entry is a snapshot of the oscilloscope at the moment it is taken: it captures the waveforms, their setups, and
any measurements in process. As each new entry is created, it is added to the database of My Notebook Entries
accessible from the LabNotebook dialog, where they can be recalled to the screen through Flashback Recall.

1. Choose

File > LabNotebook

to open the LabNotebook dialog.

2. Touch

Create

.

3. Optionally,

Enter Report Title

and

Description

.

The default title is the date and time stamp. You can leave this as is, append some descriptive text to it, or completely
remove it from your title.

NOTE

: By default, you will be prompted to title and annotate notebook entries as they are created. You can

LabNotebook preferences

so that these steps are skipped in order to streamline the creation process. To update

entries at a later time, select the entry from the list of Notebook Entries, then open the tab that appears behind the
LabNotebook dialog.

Print to Notebook Entry

The front panel Print button can be configured to capture the display and create a new Notebook Entry. This is a
convenient way to create new Notebook Entries as you work.

To configure the Print button for Notebook Entries, go to

File > LabNotebook > Preferences tab

and check

Create Entry

when Hardcopy Pressed

.

923648 Rev A

81

«
...
85
86
87
88
89
...
»

Summary of Contents for WaveSurfer 3000


































































































Reviews:

No comments