WaveSurfer 3000 Oscilloscopes
Annotating Traces
The Label function gives you the ability to add custom annotations to traces that are shown on the
display. Labels are numbered sequentially in the order they were created. Once placed, labels can be
moved to new positions or turned off.
Create Label
1. Touch the trace, then choose
Set label...
from the pop-up menu.
OR
Touch the trace descriptor box twice, then touch the
Label shortcut button
on the setup dialog.
2. On the Trace Annotation pop-up, touch
Add Label
.
3. Enter the
Label Text
.
4. Optionally, enter the
Horizontal Pos.
and
Vertical Pos.
(in same units as the trace) at which to place the label. The
default position is 0 ns horizontal. You can optionally check
Use Trace Vertical Position
instead of entering a
Vertical Pos.
Reposition Label
Once placed, labels can be repositioned by touching and dragging to a new location on the grid, or reopen the Trace
Annotation pop-up and enter a new
Horizontal Pos.
and
Vertical Pos.
Edit/Remove Label
1. Touch the label and choose
Set Label
from the pop-up menu.
2. Select the
Label number
. You can use the
Up/Down arrow
keys to scroll the list.
3. Change the
Label Text
, or touch
Remove Label
to delete it.
Turn On/Off Labels
After labels have been placed, you can turn on/off all labels at once by opening the Trace Annotation dialog and
selecting/deselecting the
View labels
checkbox.
16
923648 Rev A
Summary of Contents for WaveSurfer 3000
Page 1: ...Operator s Manual WaveSurfer 3000 Oscilloscopes ...
Page 97: ......