Teledyne Lecroy WaveSurfer 3000, Operator'S Manual, Page: 15 / 97

Operator's Manual
Digital Inputs
Available with the WS3K-MSO option, the digital leadset enables
input of up-to-16 lines of digital data. Lines can be organized into two
logical groups and renamed appropriately.
The digital leadset features two digital banks with separate Threshold
controls, making it possible to simultaneously view data from
different logic families.
Connecting/Disconnecting the Leadset
To connect the leadset to the oscilloscope, push the connector into the mixed signal interface below the front panel until
you hear a click.
To remove the leadset, press in and hold the buttons on each side of the connector, then pull out to release it.
Grounding Leads
Each flying lead has a signal and a ground connection. A variety of ground extenders and flying ground leads are
available for different probing needs.
In order to achieve optimal signal integrity, you should connect the ground at the tip of the flying lead for each input
used in your measurements. Use either the provided ground extenders or ground flying leads to make the ground
connection.
923648 Rev A
9