background image

USB2-GPIB Adapter 

8

 

 

Warranty 

THE WARRANTY BELOW REPLACES ALL OTHER WARRANTIES, EXPRESSED 
OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF 
MERCHANTABILITY, FITNESS, OR ADEQUACY FOR ANY PARTICULAR 
PURPOSE OR USE. TELEDYNE LECROY SHALL NOT BE LIABLE FOR ANY 
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WHETHER IN 
CONTRACT OR OTHERWISE. THE CUSTOMER IS RESPONSIBLE FOR THE 
TRANSPORTATION AND INSURANCE CHARGES FOR THE RETURN OF 
PRODUCTS TO THE SERVICE FACILITY. TELEDYNE LECROY WILL RETURN 
ALL PRODUCTS UNDER WARRANTY WITH TRANSPORT PREPAID. 
The product is warranted for normal use and operation, within specifications, 

for a period of one year from shipment. Teledyne LeCroy will either repair or, at 
our option, replace any product returned to one of our authorized service 
centers within this period. However, in order to do this we must first examine 
the product and find that it is defective due to workmanship or materials and 
not due to misuse, neglect, accident, or abnormal conditions or operation. 
Teledyne LeCroy shall not be responsible for any defect, damage, or failure 
caused by any of the following: a) attempted repairs or installations by 
personnel other than Teledyne LeCroy representatives, or b) improper 
connection to incompatible equipment, or c) for any damage or malfunction 
caused by the use of non-Teledyne LeCroy supplies. Furthermore, Teledyne 
LeCroy shall not be obligated to service a product that has been modified or 

integrated where the modification or integration increases the task duration or 
difficulty of servicing the oscilloscope. Spare and replacement parts, and 
repairs, all have a 90-day warranty. 
Products not made by Teledyne LeCroy are covered solely by the warranty of 
the original equipment manufacturer. 
 

Summary of Contents for USB2-GPIB













Reviews: