PCI Express
®
M.2 Interposer for Summit Analyzers
User Manual and
Quick Start Guide
Before Starting
Use this document for quick installation and setup. If you experience problems or
need more information, see the product manuals available at the Teledyne LeCroy
web site or in the Documents folder in the PCIe Protocol Suite installation DVD.
1
Introduction
The Teledyne LeCroy PCIe 3.0 M.2 Interposer, which is used with Summit™ Protocol Analyzers,
enables PCIe
®
bus traffic between a system board or tablet and a M.2/NGFF connector on a PCIe M.2
device to be monitored, captured, and recorded for protocol analysis. The M.2 interposer will support
analysis for PCIe host interfaces such as SATA Express (AHCI/PCIe) and NVM Express (NVMe) at
data rates from 2.5 GT/s up to 8.0 GT/s and link widths of up to x2 or up to x4 depending on the key
type.
