Teledyne Lecroy PCI Express 2.0 Mid-Bus Probe, Installation And Usage Manual, Page: 18 / 29

Teledyne LeCroy PCI Express Mid-Bus Probe for Summit Analyzers Version 1.1
18
4.6 Pin Assignments for x2 Lane Widths
For x2 lane widths, a half-size header can be used. The diagram below shows the recommended pin
assignments for x2 configurations.
x2 (Bi-directional) Mid-Bus Probe Pinout
on a Half-size Header
Pin Signal Name Pin Signal Name
G1 GND (Gen2 only)
2 GND 1 C0p- Upstream
4 C0p- Downstream 3 C0n- Upstream
6 C0n- Downstream 5 GND
8 GND 7 C1p- Upstream
10 C1p- Downstream 9 C1n- Upstream
12 C1n- Downstream 11 GND
14 GND 13 nc
16 nc 15 nc
18 nc 17 GND
20 GND 19 nc
22 nc 21 nc
24 nc 23 GND
G2 GND (Gen2 only)