Introduction
Use this document for installing a Frontline X500 Battery Pack as an external power source for the Frontline X500 protocol
analyzer. Once installed, refer to the X500 Quick Start Guide on how to use the X500 protocol analyzer. Detailed hardware
and software information is contained in the Wireless Protocol Suite Hardware and Software User Manual. The manual is
also available on FTE.com.
Components
Inspect the received shipping container for any damage. Unpack the container and account for each of the system
components listed on the accompanying packing list. Visually inspect each component for any damage. In the event of
damage, notify Teledyne LeCroy. Retain all shipping materials for shipper's inspection. The X500 battery does not contain
any user serviceable items. Any repairs and maintenance must be performed by a service technician that has been trained
and approved by Teledyne LeCroy.
The analyzer package includes the following components in addition to the X500 battery pack:
Before installing the battery pack on the X500, it is highly recommended to fully charge it.To do so, connect the power
adapter to the battery charging adapter. The LED turns red indicating the adapter is powered correctly. Then connect the
battery charging adapter to the battery pack. The LED indicator on the charging adapter starts blinking blue. When it's fully
charged, the LED turns solid green. Proceed to the installation section below.
Qty
Description
1
15V 8A power supply
1
Battery charging adapter for standalone charging
Frontline X500
TM
Battery
Installation Guide
1
2
