Teledyne Lecroy FrontLine Harmony, User Manual

Page: 26 / 59

Frontline Harmony Hardware & Software User Manual 26
Chapter 4. Running Tests
Harmony software allows you to run one, multiple or all Link Layer and HCI tests provided. (Figure 4.1)
Figure 4.1 – Running Tests
4.1 Selecting Tests
4.1.1 HCI
The Harmony software provides 45 HCI tests (Table 4.1). To run HCI tests, expand the HCI Test Suite to
select one or more specific tests, or you may select Test Suite – HCI to run all HCI tests.
Table 4.1 – HCI Tests
Test Description Summary
HCI/AEN/BI-01-C Verify that the IUT can return an error when invalid public keys is received.
HCI/AEN/BV-06-C Verify that the IUT can generate a P-256 Public-Private key pair and return
the P-256 Public Key
HCI/AEN/BV-07-C Verify that the IUT can generate a new Diffie-Hellman Key
HCI/AEN/BV-08-C Generate Debug Keys
HCI/CCO/BV-07-C Verify that an IUT which supports LE only, does not respond to BR/EDR HCI
commands
HCI/CCO/BV-09-C Verify that the IUT correctly handles the LE Set Data Length Command
HCI/CCO/BV-10-C Verify that the IUT correctly handles the LE Read Suggested Data Length
Command
HCI/CCO/BV-11-C Verify that the IUT correctly handles the LE Write Suggested Data Length
Command
HCI/CCO/BV-12-C Verify that the IUT correctly handles the LE Remove Device From Resolving
List Command
HCI/CCO/BV-13-C Verify that the IUT correctly handles the LE Clear Resolving List Command