Teledyne Lecroy Frontline BPA 600, Hardware And Software User Manual, Page: 31 / 348

1. PIN is a six-digit (or less if leading zeros are omitted) decimal number.
2. Out-of-Band (OOB) data is a 16-digit hexadecimal code which the devices exchange via a
channel that is different than the le transmission itself. This channel is called OOB. For off-the-
shelf devices we cannot sniff OOB data, but in the lab you may have access to the data
exchanged through this channel.
3.1.2.4.2 BPA 600 Devices Under Test - Classic Single Connection
Figure 3.9 - BPA 600 Devices Under Test - Classic Only Single Connection
Specifying the Bluetooth Device Address (BD_ADDR)
Select the Bluetooth device address (BD_ADDR) form
the Classic Device: drop down list or from the Device
Database . You can also type in the address as a 12 digit
hex number (6 octets). The "0x" is automatically typed
in by the control. Any devices entered this way is
added to the Device Database
In single connection mode, the analyzer needs to
know the Bluetooth® Device Address (BD_ADDR) for
each device, but it does not need to know which is
master or slave, ComProbe analyzercan figure that
TELEDYNE LECROY Chapter 3 Configuration Settings
23 Frontline BPA 600 Hardware & Software User Manual