Teledyne Lecroy Frontline BPA 600, Hardware And Software User Manual, Page: 285 / 348

1. To open the Side Names dialog, choose
Side Names…
from the
Options
menu on the
Control
window.
2. To change a name, click on the name given in the Current Names column, and then click again to
modify the name (a slow double-click).
3. Select
OK
to initiate the changes. The changes that have been made will not fully take effect for any
views already open. Closing and reopening the views will cause the name change to take effect.
4. To restore the default values, click the Set Defaults button.
7.1.4 Timestamping
Timestamping is the process of precise recording in time of packet arrival. Timestamps is an optional
parameter in the Frame Display and Event Display that can assist in troubleshooting a network link.
7.1.4.1 Timestamping Options
The Timestamping Options window allows you to enable or disable timestamping, and change the resolution
of the timestamps for both capture and display purposes.
To open this window:
Choose
Set Timestamp Format…
from the
Options
menu on the Frame Display and Event Display
window or click on the Timestamping Option icon in the Event Display toolbar. The Timestamping
Options window will open.
Figure 7.7 - Timestamping Options dialog
Chapter 7 General Information TELEDYNE LECROY
Frontline BPA 600 Hardware & Software User Manual 277