Frontline Technical Support: Phone +1-434-984-4500 or email [email protected]
Quick Start
Guide
Computer System Requirements
Supported Systems
l
Operating System: Windows 7/8/10
l
USB:USB 2.0 and 3.0 High Speed
Minimum Requirements
l
Processor: Core i5 at 2.7 GHz
l
RAM: 4 GB
l
Free Hard Disk Space: 20 GB
Install Software
l
From CD: Insert the ComProbe installer disk into your
computer DVD drive. Click on the Install CPAS shortcut
and follow the directions.
l
From Download: Download the latest ComProbe installer
from FTE.com. Once downloaded, double-click the
installer and follow the directions.
1. Attaching Antennas
When you remove the Frontline BPA 500 hardware from the box, the first step
is to attach the antennas .
Attach antennas to
RF
under
LE
and
RF
under
CLASSIC
.
2. Apply Power and Connect
Once you have attached the antennas, the next step is to power up
and connect the Frontline BPA 500 to the computer.
Insert the power cable (DC connector) from the 12 volt AC adapter
into the "Power" port on the ComProbe .
Plug the 12 volt AC adapter into the AC power source.
Insert the other end of the USB cable into the PC.
Turn on the devices that you are testing.
Finally position the BPA 500 hardware between the devices.
It may be easier to sync and then capture data if the devices are somewhat separated because
Bluetooth
adjusts power levels on
devices that are in close proximity, which can affect the ability to sync and the quality of the trace. Also, don't place the BPA 500 right
next to the computer; close proximity to the computer could cause some interference.