Telect MIX 56, User Manual

Page: 75 / 124

MIX 56 User Manual 4 Software Operation
122188-10 A0 Telect, Inc.
4-29
Restoring to the Factory configuration also disables security and resets the
System Interfaces screen. Restoring to the Factory configuration does not
change any of the three NVRam saved configurations.
Restoring the entire NVRam configuration from a file restores all three of
the saved configurations plus restoring all the settings of the Security
screen, Alarm Threshold screen, System Interface screen, and Update
Flash screen.
ALERT
!
ALERT! Restoring the entire NVRam from a file or restoring to
the Factory configuration resets the System Interfaces screen
which includes the IP address, Subnet Mask address, and the
Craft Port’s baud rate. This has the possibility of killing your
communications link.
The Factory configuration does not have an IP address or Sub-
net Mask address. If you restore this configuration remotely,
you will not be able to reconnect to the system until the ad-
dresses are added through the local Craft Interface via the Craft
port.
The Factory configuration resets the local Craft Port’s baud
rate to 9600.
MIX 56 by Telect Mix56 Directory (CTRL+D)
Help (?)
Restore Configuration
---------------------
# Name
-- ----------------
1 Working Config
2 asdf
3 mine
4 Factory
5 Restore From a File
6 TFTP, Restore From a File
Select Number: 1