Telect, Inc. • USA +1.509.926.6000 • 52.33.3836.37.52
www.telect.com • © 2010 Telect, Inc., All Rights Reserved, 139256 A0
Page 2-14
7. Use cable ties liberally along the lower tie-down bar and tie-down lances (loops) at the rear of
the chassis.
8. Insert cross-connecting cables to upper two connectors, labeled IX and OX on DSX cards.
9. If applicable, connect tracer wire to the port above the tracer LED, as shown.
10. Use cable ties along the upper tie-down bar to restrain the X-connect cables.
Figure 11 - Connections
