23
www.behnke-online.com
IP camera Instructions
Introduction
GB
person. The lighting situation, the camera's
angle of view (horizontal / vertical), reflectance
from other light sources and sunlight, back
lighting and blind spots all have an influence
on your future image quality. It is important that
you avoid direct sunlight, as the camera shutter
will reduce light incidence into the camera and
consequently will reduce the image sensor
performance. Therefore, try to have the sun
behind the camera when choosing your camera
position. In order to prevent problems from
back lighting when filming objects or people,
you should consider changing the surrounding
area by changing the camera position. Where it
proves to be impossible to change the camera
position, the object or person in question
should be sufficiently lit from the front.
Accessing the video feed
To access the video feed via a web browser,
please use the following URL:
"http://<user>:<password>@<ip-addr>/
axis-cgi/mjpg/video.cgi?resolu-
tion=1920x1080“
(20-2906A-IP/21-2906A-IP/50-2906A-IP/
43-9588)
http://<Benutzer>:<Passwort>@<ip-addr>/
axis-cgi/mjpg/video.cgi
(43-9582/43-9582A/43-9582B)
Additional options can be found within the
documentation on the VAPIX interface provided
by AXIS.
System requirements
Minimum requirements to install Behnke IP
cameras:
PC or Apple Macintosh with browser (e.g. Mic-
rosoft Internet Explorer, Mozilla Firefox, Apple
Safari)
▸
Monitor/graphics card with a resolution of at
least 800 x 600 pixels and true colour display
▸
Set-up network connection
▸
A free Ethernet port with PoE or a separate
PoE injector.
Requirements to install the
Behnke IP video software:
PC with Intel® Pentium® IV processor
(1.7 GHz) or AMD Athlon™ Processor
(1.2 GHz) or better
▸
Network interface controller, configured
▸
Microsoft® Windows 2000® or
Windows XP® operating system or later
▸
512 MB RAM or more
▸
Monitor/graphics card with a resolution of at
least 800 x 600 pixels and true colour display
System requirements for the camera:
The M3045 AXIS camera type supports AXIS
firmware version 7.20.1 and shall only be used
with this version.
The M3007 AXIS camera type supports AXIS
firmware version 6.30.1 and shall only be used
with this version.
Please adhere to all standard rules pertaining
to network technology.
