Telecom Behnke 10 Series, Manual, Page: 51 / 112

51 www.behnke-online.de
GB
Instructions for Behnke SIP 2.0
Installation
2.4. Universal devices 20-0005-IP
1. Please mount the universal electronics in a
weatherproof location inside the provided
housing and please connect the electronics
to the interface unit.
2. Please take notice of the advice on wiring,
distances and wire lengths
on page 45.
3. Connected buttons need to comply with
the requirements stated in NE60950 for
communication circuits (TNV). Standard “bell
buttons” usually do not meet these require-
ments, please use Behnke buttons where
required!
4. For additional information, please see
the manual of the connection box 43-9251
required for operation.
Unclip the stainless steel strip
Remove the stainless steel strip
Connect and fix the door intercom station
2.5. Series 10/50
Series 10/50 door intercom stations come
pre-assembled. To mount these door intercom
devices, please follow the steps shown here.
For advice on electric mounting, please see the
following pages.