Messages
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
82
UST DK Electronic Telephone
System Messages 65~99
System messages 65~99 can only be programmed or permanently changed at the
Administrator’s telephone. Any messages programmed at Administrator’s telephone remain in
memory until canceled from Administrator’s telephone or until the system is reinitialized.
Station Messages
You can create up to 10 station messages (10~19). Once entered, a message can never be
deleted; only overwritten. This is a station option that is enabled in system programming.
➤
To enter/store a station message
System Message
Number
Preprogrammed message
(Max. 32 digits per message)
60
OUT TO LUNCH
61
IN A MEETING
62
CALL _____________
63
BACK AT __________
64
RETURN ON________
1. Press
"
...or [PDN] +
&%
.
The LCD M or [PDN] LED flashes.
2. Enter the two-digit
message number
(10~19) to be stored.
The current message, if any, is displayed.
3. Enter the message.
(See “To enter LCD
characters” on Page
80.)
The LCD M or [PDN] LED lights, and the message displays.
The message is now stored in system memory.
4. Repeat Steps 1~3 for
any additional
messages you want to
store.
MSG NO. ?
