Rev. 004
Energy 2510 D
GB
13
5.5 Electronic Control Panel Connection
Choose the position you want inside the vehicle
and make a rectangular hole sized 30 x 32 mm.
Identify the path for laying the connection cable
(fig. 22) from the control panel to the generating
set.
We remind you that a 5 m long cable is delivered
standard. Optional cables in longer sizes are also
available
:
7 m (code 03797), 10 m (code 03798),
15 m (code 03799).
Arrange the connection cable (fig. 22) so as to
connect the black connector side (fig. 22 ref. 1) to
the control panel, and the white connector side
(fig. 22 ref. 2) to the generating set.
Let the connection cable coming from the
generating set out of the hole and connect the
black connector of the cable (fig. 22 ref. 1) on the
back of the electronic control panel. Fasten the
electronic control panel (Fig. 21) using self-
tapping screws sized 3 x 20 mm, and make sure
that the rear part does not touch other surfaces;
use slight pressure to fasten the plastic frame
until you hear the click of the fastening tabs.
Connect the other end of the connection cable
(fig. 22 ref. 2) to the proper white connector (fig.
23 ref. 1) which is located on the side of the
generator control box; observe proper connection
side.
6 OPERATING INSTRUCTIONS
ENERGY
series generating sets consist of Diesel
endothermic engines connected to an alternator
able to produce both alternating and direct
electrical current. The generating sets are
assembled inside a steel plate casing, insulated
and sound-proofed using special sound-
deadening material.
Fuel is fed to the endothermic engine via a pump
which is fitted standard on the generating set.
6.1 Fuel
Use Diesel oil in compliance with the minimum
requirements as provided for by the following
standards:
EN-590
or
BS-2869-A1/A2
or
ASTM-
D-975-1D/2D.
If ambient temperature is below 0°C, use winter
Diesel.
6.2 Machine safety
The generating sets come with perfectly sealed
casings, so there is no danger of contact with any
moving or high temperature parts or with live
cables.
Summary of Contents for Telair ENERGY 2510D
