GHN-AT-PROG-UPLC-3-SLOPE Reference Manual
Page 9 of 12
6.1.1.2
CLI Command List
No
Commands
1
set attn <UserIDNum> <ChannelNum> <AttnValue>
Set the attenuation value, for the specified channel(s), on the device(s) identified with
specified User ID Number(s).
Example: set attn 87654321 1 20
2
set slopefilter <UserIDNum> <ChannelNum> <SlopeFilterState>
To set or bypass the slope filter, for the specified channel(s), on the device(s) identified with
the specified User ID Number(s)
Example: set slopefilter 87654321 1 on
3
set userid <UserIDNum> <newUserIDNum>
To change the User ID Number value of a device.
Example: set userid 87654321 87654
4
show attn <UserIDNum>
Display the attenuation level of the specified devices(s) connected to the host PC.
Example: show attn 1234567a,1234567b
5
show attndevicelist
Display a list of devices connected to the system including Device Index, Device ID & User
ID number.
Example: show attndevicelist
6
show version
Display the version of the current software application.
Example: show version
7
Show -h
Displays the help menu with command description and uses.
8
Refresh
Display an updated device list.
NOTE Arguments:
UserIDNum - single or in group (separated by a comma)
ChannelNum - single, range (separated by colon), or in group (separated by comma)
AttnValue - single or in group (separated by a comma)
SlopeFilterState - numeric value (range: 1 to 100)
newUserIDNum
-
maximum of 8 characters
