Model 458-2SL User Manual - Rev. D
*stb?
Status Byte register read
read IEEE stb
*ese?
Enable Status Event read
read IEEE ese
*sre xx
Status Request Enable write
write IEEE sre xx
*ese xx
Enable Status Event write
write IEEE ese
:cs:BR
Configure serial
where BR = 300, 600, 1200, 2400, 4800, 9600 or 19200
:cp:ADD
Configure 488
where ADD = 1, 2, ... 29, 30 (No leading zeroes used)
Notes: All Set card lengths, English/Metric mode and Echo enable/disable are maintained during
power off in both RS-232 and IEEE modes. Manual control is enabled at power on.
Page 11
*SRExx
Enables Status Bits as defined by the numerical value of the bits following the
command.
*SRE?
Used to read the Enabling Bits in the Status Register.
*STB?
Reads the Status Register
*ESExx
Enables Event Status Bits as defined by the numerical value of the bits
following the command.
*ESE?
Used to read the Enabling Bits in the Event Status Enable Register.
*ESR?
Reads the Event Status Enable Register.
