TA74 User Manual
Programming | en 35
TA74_UM_EN_V2.5_2019.09_Final
© TeleAlarm SA
6.3.5
Exiting Service mode
The TA74 automatically exits Service mode after performing function 1, 2, 3 or 6.
Press any button on the TA74 to exit function 4 or 5.
6.4
Registering wireless transmitters 1 and 2
This function allows the registration of a wireless transmitter to the TA74 (without using
any software).
Assigning a wireless transmitter to the TA74
1. Press the
Maintenance button
and use function 1 or 2.
► If necessary, see section
6.3.4 "Entering Service mode", page 34
► It is possible to assign up to two wireless transmitters to the TA74 (the first with function
1 and the second with function 2).
2. Press the
Emergency call button
to confirm the function selection.
3. Press the wireless transmitter button to register the device with the TA74.
4. Press the wireless transmitter button a second time to confirm the pairing between the
two devices.
► After having performed the pairing, the TA74 automatically exits Service mode.
INFO
If no button is pressed for eight seconds, the TA74 will automatically exit Service mode.
INFO
The wireless transmitter which is delivered with the TA74 is already paired. Assigning
another wireless transmitter using function 1 will replace the original wireless transmitter
with the new one.
INFO
The description below applies to functions 1 and 2.
