32 en | Programming
TA74 User Manual
© TeleAlarm SA
TA74_UM_EN_V2.5_2019.09_Final
6
Programming
Before you program the TA74, you must be familiar with all of the device's functions.
Programming may only be carried out by trained and authorised personnel.
6.1
Programming methods
Three programming methods are available:
–
via the Configuration Manager software
–
via TeleAlarm
®
Cloud Services
–
via a compatible alarm receiving centre
Please refer to the corresponding documents for more information.
6.2
Vocal reminders
Three reminder messages can be recorded. Each notification can be automatically played
on a configured day and at a configured time. It is repeated every 20 seconds until the
Daily button
is pressed or the preset time has elapsed. If the reminder message is not
acknowledged, the device can send an alert to the alarm receiving centre.
Please refer to the
Reference Manual
and the
Configuration Manager Manual
for more
information on programming.
NOTE
Correct programming of the TA74 is essential to ensure the full functionality of the device.
When the device is put into operation for the first time, the red and blue LEDs will flash
alternately, and the device will emit five beeps every 30 seconds. This warning signal
indicates the need for initial programming of the device.
Please refer to the
Reference Manual
for more information on programming.
INFO
Check the remote programming possibilities with your alarm receiving centre.
