6.6 S tart the transmitter in discontinu ou s mode
To control a receiver, the transmitter must be registered in the receiver.
If no transmitter is controlling the receiver, the first registered transmitter to be
started will automatically take control of the receiver.
When not in use, transmitters must be stored in a secure storage space.
RISK OF UNINTENDED EQUIPMENT OPERATION. The transmitter will start
transmitting as soon as a button is pressed.
NOTE: Go through the functionality test (see
) before
starting the transmitter.
1. Press a button on the transmitter to start controlling the receiver.
The top LED lights (green when the battery capacity is good, red when the
battery capacity is poor).
NOTE: The radio transmission ends as soon as all buttons are released.
6.7 Log the transmitter ou t f rom a receiver
NOTE: Only for
continuous
radio mode.
NOTE: The logout function cannot be activated/deactivated from the transmitter
Contact your representative for assistance.
For this transmitter, the logout function is deactivated by default.
ED-PN-TX105-EN-v02
19
