6.2 Radio mode
NOTE: To establish a radio link between the transmitter and the receiver, both
units must be set to the same radio mode.
This transmitter is set to
continuous
radio mode by default. The transmitter starts
to transmit continuously as soon as it is started. The radio transmission ends when
the stop button is pressed. When the system is in continuous radio mode, buttons
7 and 8 are used as start buttons.
NOTE: Some functions are only available when the products are transmitting
continuously. Those functions are marked: "Only for continuous radio mode" in
the manual.
18
ED-PN-TX103-EN-v04
