End user instructions
│
T9/T11
│
Chapter 7: Battery
7 .2 .2 C H A RG E T H E B A T T ERY
NOTE: For T9 transmitters, the 1/O switch must be in the 1/on position when
charging.
1. When the battery capacity reaches
approximately 10 %, the top LED lights
red and the internal buzzer beeps 3
times.
2. Lift the protection cap and insert the
charger plug into the socket on the
back of the transmitter. The top LED
flashes red while the battery is
charging.
If the transmitter has a replaceable
rechargeable battery, it can be removed
and recharged using the Tele Radio AB
charger unit, see below.
Charger unit:
The charger's LED lights red while the
battery is charging.
ED-TG2-TX102-EN-v02
31
