elmeg IP140 / en / elmeg140_v1 / web_configurator.fm / 09.04.2014
V
e
rsion 2, 27.0
5
.2010
115
elmeg IP140
bintec elmeg
Configuring phone settings via the Web configurator
USB mode and data transfer
You can connect a USB storage device, e.g., a USB stick, to the phone. The USB memory can be
used in two ways.
u
For bintec elmeg Mobile Office
u
As a memory extension
For further information on this, please also refer to the section
On this screen you set the USB mode and transfer data from the USB stick to the phone and vice
versa.
Settings
¢
Network and Connections
¢
USB Mode and Data Transfer
De-registering the USB stick from the phone
To prevent loss of data, you should de-register the USB stick from the device before removing it
from the device.
¤
Click on
OK
next to
Deregister USB stick
.
You can now remove the USB stick.
Using a USB stick for Mobile Office
Activate Mobile Office Mode
You must activate the function before you can use Mobile Office. The function is not activated
by default.
¤
Select
Yes
to activate the Mobile Office mode.
If a USB stick is plugged in when
Mobile Office mode
is being activated, you will be asked
whether you want to start Mobile Office mode. If you enter
Yes
, the device is restarted with the
data on the USB stick.
