elmeg IP140 / en / elmeg140_v1 / web_configurator.fm / 09.04.2014
V
e
rsion 2, 27.0
5
.2010
111
elmeg IP140
bintec elmeg
Configuring phone settings via the Web configurator
Server and phone systems
If you operate a separate HTTP server or a phone system in your local network, use this screen
to configure access to your phone.
Settings
¢
Network and Connections
¢
Server and Phone Systems
Configure HTTP proxy
¤
Select whether you want to release a separate proxy server in the network for your phone.
¤
If
Yes
, enter the IP address for the proxy server in the
Proxy Server Address
field.
¤
The
Proxy Server Port
is preset to 5060. Change this if your server uses a different port.
Own HTTP server settings
¤
If you operate your own HTTP server, enter the communication data.
HTTP Port
Enter the number for the port to be used for communication by the HTTP server. The default
setting is 80
HTTPS Port
Enter the number for the port to be used for secure connections by the HTTP server. The
default setting is 443
HTTP Connection Type
Select which connections can be established:
Automatic logout [min]
Enter the time (minutes) after which an HTTP connection should automatically end if no
entries are made.
Phone systems
If your phone is connected to a phone system, select what type of phone system it is.
Connected with phone system
(sample selection)
Call Manager
Select whether you want to accept calls that are transferred via the Call Manager of the phone
system, directly. You have the following options:
– via Headset
–
via Handsfree
or
– not at all (
No
)
HTTP
Unsecured connection
HTTPS
Secure connection
HTTP + HTTPS
Both secure and unsecured connections
elmeg hybird
The phone is connected to an elmeg hybird phone system. These
are the recommended phone systems to achieve an optimum sup-
port of the telephone features.
Standard
The phone is connected to any phone system.
. . .
