elmeg DECT200 Multicell System / en / elmegDECT200M_en / web-conf.fm / 18.10.2013
V
e
rsion 1, 01.0
7
.2012
95
elmeg DECT200 Multicell System
bintec elmeg
Configuring the system on the DECT Manager
System log (SysLog)
The system report (SysLog) gathers information about selected processes performed by the
DECT Manager and base stations during operation and sends this to the configured SysLog
server.
Settings
¢
Management
¢
System log
¤
Enter the
IP Address
and
Server port
for storing the system log on a server (default setting
for the server port: 514).
¤
Activate the
System log.
¤
Select the DECT Manager and base station data to be sent to the SysLog server.
¤
Click on
Set
to save your settings on the page.
The changes take effect with the next system event.
Summary of Contents for BinTec Elmeg DECT200
Page 3: ......
