elmeg DECT200 Multicell System / en / elmegDECT200M_en / web-conf.fm / 18.10.2013
V
e
rsion 1, 01.0
7
.2012
94
elmeg DECT200 Multicell System
bintec elmeg
Configuring the system on the DECT Manager
Rebooting the system
Your elmeg DECT200 Multicell System is automatically rebooted on a regular basis. This does
not normally cause the system to become unstable, but if an unforeseeable system error should
occur, you can reboot the system manually.
Settings
¢
Management
¢
Reboot
Immediate reboot
¤
Click on
OK
next to
Reboot system
.
The reboot begins immediately. All existing connections are terminated.
Regular system check
The system regularly checks whether a reboot is necessary. If it determines that a reboot is
required, this operation is performed. If a phone call is in progress, the reboot will be postponed
by up to two hours.
The check will be performed at the specified time on the selected days, at least once per week.
¤
Select a day (or
Daily
) and enter a time for the check. The default setting, controlled by a
random generator, is between 12.30 a.m. and 3.30 a.m. on a
Sunday
.
¤
Click on
Set
to save your settings on the page.
Caution
Only perform this function if the following message is displayed:
Reboot and system synchronisation are recommended.
No calls can be made while the phone system is rebooting. Rebooting can take up to a few
minutes.
Summary of Contents for BinTec Elmeg DECT200
Page 3: ......
