elmeg DECT200 Multicell System / en / elmegDECT200M_en / web-conf.fm / 18.10.2013
V
e
rsion 1, 01.0
7
.2012
91
elmeg DECT200 Multicell System
bintec elmeg
Configuring the system on the DECT Manager
¤
Enter all the data for your LDAP server:
Directory via XML protocol
If a corporate directory is provided via an XML server, you will need the access data to set it up.
¤
Enter a name in the
Directory name
field. This is the name under which the directory will be
displayed on the handsets.
¤
Enter the XML server details.
Enable a private online directory
¤
If a private directory is available on the server in XML format, activate it and enter a name for
the directory. The private directory must be provided via the same server as the XML
directory.
Saving settings
¤
Click on
Set
to save your settings on the page.
Server address
IP address for the LDAP server in your network.
Server port
Port number that is used to provide the LDAP service. The default
setting is 389
Base Distinguished
Name
Entry at which the directory display/search is to begin.
Username
Access ID for the LDAP server.
Password
Password for the access ID to the LDAP server.
Server address
IP address for the directory.
Username
Access ID for the directory.
Password
Password for the access ID to the directory.
Summary of Contents for BinTec Elmeg DECT200
Page 3: ......
