elmeg DECT200 Multicell System / en / elmegDECT200M_en / Glossary.fm / 18.10.2013
V
e
rsion 1, 01.0
7
.2012
116
elmeg DECT200 Multicell System
bintec elmeg
Glossary
ROM
Read Only Memory
A type of memory that can only be read.
Router
Routes data packets within a network and between different networks via the quickest route.
Can connect
and WLAN. Can be a
to the Internet.
Routing
Routing is the transfer of data packets to another subscriber in your network. On their way
to the recipient, the data packets are sent from one router to the next until they reach their
destination.
If data packets were not forwarded in this way, a network like the Internet would not be
possible. Routing connects the individual networks to this global system.
A router is a part of this system; it transfers data packets both within a local network and from
one network to the next. Data is transferred from one network to another on the basis of a
common protocol.
RPN
Radio Fixed Part Number
Number for the base station in a multicell DECT network.
RTP
Real-Time Transport Protocol
Global standard for transferring audio and video data. Often used in conjunction with UDP.
In this case, RTP packets are embedded in UDP packets.
RTP port
(Local)
that is used to send and receive voice data packets for VoIP.
S
Server
Provides a service to other
s
s
). The term can indicate a computer/
PC or an application. A server is addressed via
/
SIP (Session Initiation Protocol)
Signalling protocol independent of voice communication. Used for establishing and ending
a call. It is also possible to define parameters for voice transmission.
SIP address
See
SIP port/Local SIP port
(Local)
that is used to send and receive SIP signalling data for VoIP.
SIP provider
See
SIP proxy server
IP address of your VoIP provider's gateway server.
Static IP address
A fixed IP address is assigned to a network component manually during network
configuration. Unlike the
, a fixed IP address does not change.
Summary of Contents for BinTec Elmeg DECT200
Page 3: ......
