TelcoBridges 800 1+1 series, Installation Manual

Page: 51 / 58

45
Initial System Configuration
3.5 Retrieving 800 Series Gateway Information
The 800 series gateway enables you to retrieve system information with the following shell commands:
• tbproduct (retrieve the 800 series gateway product type). See
http://docs.telcobridges.com/mediawiki/index.php/TMG:Get_Product_Type , for further information.
• tbserial (retrieve the 800 series gateway serial number). See
http://docs.telcobridges.com/mediawiki/index.php/TMG:Get_Serial_Number , for further information.
3.6 Changing the 800 Series Gateway Management Port IP
Address
Note
The following procedure must be performed on the 800 series standalone and the 800
series 1+1 system.
Each 800 series gateway has two management ports (mgmt0 and mgmt1). They are configured in
bonding by default and the values are located on the “Important Notice” sheet.
It can be modified using the following shell script:
tbchangeip
Note
If you do not have the “Important Notice” sheet, the default IP address and netmask are
set as follows:
• IP address: 172.24.0.2
• Netmask: 255.255.255.0
3.7 Changing 800 Series Gateway Management Port Passwords
Note
The following procedure must be performed on the 800 series standalone unit and the
800 series 1+1 system.
Once logged onto the 800 series gateway, type “passwd”, to change the password. The following
information will be displayed:
[root@TB003540 ~]# passwd
Changing password for user root.
New UNIX password:
Retype new UNIX password:
passwd: all authentication tokens updated successfully.