TelcoBridges 800 1+1 series, Installation Manual

Page: 42 / 58

800 Series Standalone and 800 Series 1+1 System Installation Guide
36
2.6.6 Connect to the 800 Series 1+1 VoIP Network(s)
The 800 series and 800 1 units feature dual GigE ports for connection to different VoIP
networks. This provides an access point to manage VoIP traffic. Should one of the IP networks fail, the
800 series 1+1 system will continue to manage VoIP traffic using the alternate network.
2.6.7 Connect to the PSTN Network
Note
This section only applies to the TMG800 and TSG800
The 800 series gateways feature 8 T1/E1 interfaces for connection to the PSTN network.
2.6.8 Power Up the Equipment
The 800 series and 800 1 units are furnished with one (1) or two (2) AC or DC power
connections. Only once all other equipment installation work has been completed should the 800 series
1+1 system be powered up. Refer to
Section 2.5.6 “Powering Up” on page 28.
Follow the procedure described in
Section
2.5.3 “Connecting to the 800 Series
1+1 System VoIP Network(s)” on page 24.
Gi g abit
Ethernet
Switch 1
Gi g abit
Ethernet
Switch 2
15 14 13 12
10 11 8 9 3 2 0
7 6 5 4
1
MGMT0
MGMT1
ETH0
ETH1
VOIP0
VOIP1
15 14 13 12
10 11 8 9 3 2 0
7 6 5 4
1 MGMT0
MGMT1
ETH0
ETH1
VOIP0
VOIP1
Refer to Section 2.5.4 “Connecting to the
PSTN in an 800 Series 1+1 System” on
page
25.