Telair ice S2800, Manual For Installation And User Manual

Page: 7 / 28

Rev.001 ICE S 2800
7
2.3 ID label
1
Model
2 Serial number
3 Type of power supply
4 Electrical power consumption
5 Cooling and heating capacity
6 Type and quantity of refrigerant gas
7 GWP of refrigerant gas
8 Maximum circuit pressures
9 Volume of air conditioned
10 Protection rating
11 Weight of air conditioning unit
The identification plate illustrated
is an example only.
Only the data shown on the actual
conditioner identification plate is valid.
3 TRANSPORT, HANDLING,
STORAGE
3.1 Storage
During transport the air conditioner is
protected by its cardboard packaging.
The conditioner must be stored indoors in a
horizontal position in a dry, ventilated area.
The type of packaging allows up to 5 (five)
conditioners to be stacked on top of each
other.
Do not turn the package upside-
down. The right way up is indicated by the
symbol on the packaging (
↑↑
).
Stacking more than five packaged
air conditioners can damage the
conditioners themselves and put
personnel at risk of injury.
3.2 Weight
Weight of
ICE S 2800 including packaging :
45 kg
3.3 Handling
Always observe safety and
accident prevention regulations when
lifting and transporting. Use only lifting
and transport gear of a load bearing
capacity greater than the weight to be
lifted.
Packaged air conditioners can be moved
using standard means of lifting and transport.
4 INSTALLATION
4.1 Preliminary information
Improper installation of the air
conditioner can result in irreparable
damage to the appliance and endanger
the user's safety.
European Machine Directive 2006/42/EC
states that the manufacturer cannot be held
liable for poor air conditioner performance
and/or safety should the air conditioner fail to
be installed in observance of the information
provided in this manual. Moreover, the
manufacturer cannot be held liable for any
resulting injury or damage.
1 3
7 8
9 10 11
6
4
5
2