Tektronix WVR6020, Technical Reference

Page: 22 / 138

Speci fi cations
Table 12: Timecode characteristics (cont.)
Characteristic Performance requirement Reference information
LTC signal type Linear Time Code as de fi ned by SMPTE
12M.
ANC TC signal type Ancillary Data Timecode was de fi ned by
SMPTE RP 188-1999.
Supported Time Code Signal
Types and Sources
Option HD LTC from Remote connector.
ANC TC from HD.
SD (WVR7020, WVR7120) VITC from 525/270 SDI.
ANC TC from SD.
SD (WVR6020) VITC from 525/270 SDI.
LTC from Remote connector.
ANC TC from SD.
Option CPS VITC from composite.
Table 13: General characteristics
Characteristic Performance requirement Reference information
Presets 5 user presets and a Factory default.
Real Time Clock Time set by user, used for log time
stamps.
Field Upgradeable SW and FPGA All code except for boot fl ash can be
upgraded.
Battery life and retention time, typical 10 years for normal operation, 5 years
worst case. Battery not drained while instrument is
off, drain higher at elevated temperature.
Low light illumination, typical "Off" leds optionally driven at user
selected level from 1 to 10%.
Preset Parameters
Covers all parameters except
con
fi gure/utilities menu items.
Line Select Function Any one tile may be in line select for
waveform, vector, arrowhead, diamond,
or lightning.
Line Select Bright-up Selected line is indicated with a cursor in
picture and
fi eld sweeps.
Picture cursor can be disabled.
Line Select Range Any line, numbered according to
appropriate standard, frame and color
frame structure. Fields greater than 1 display the line
number in the
fi eld and the line number in
the frame or color frame.
Acoustic Noise Level, typical Front 40, rear 39, side 38 dB(A) for
standing location at 25 °C ambient.
Front 41, rear 45, side 38 dB(A) for sitting
location at 25 °C ambient. Measured as per ISO7779. Unit placed
on desk, measured in operator location.
Fan speed and noise increase at higher
temperature.
8 Waveform Rasterizers Speci fi cations and Performance Veri fi cation