Tektronix WFM5250, Service Manual

Page: 51 / 57

Repackaging Instructions
Repackaging Instructions
This section contains the information needed to repackage the instrument for
shipment or storage.
Packaging
When repacking the instrument for shipment, use the original packaging. If
the packaging is unavailable or un
fi t for use, contact your local Tektronix
representative to obtain new packaging. Refer to Contacting Tektronix on the back
of the Title page for the mailing address, the email address, and phone number.
Seal the shipping carton with an industrial stapler or strapping tape.
Shipping to the Service Center
Contact the Service Center to get an RMA (Return Material Authorization)
number, and any return or shipping information you may need.
If the instrument is being shipped to a Tektronix Service Center, enclose the
following information:
The RMA number.
The owner's address.
Name and phone number of a contact person.
Type and serial number of the instrument.
Reason for returning.
A complete description of the service required.
Mark the address of the Tektronix Service Center and the return address on the
shipping carton in two prominent locations.
WFM5250 Waveform Monitor Service Manual 35