Tektronix WFM2200A, User Manual

Page: 73 / 276

To configure the
Watch List
The Watch List allows you to limit the data types viewed in the ANC Data
display to only the types you specify. To configure the Watch List, perform the
following steps:
1. Press the CONFIG button and select ANC Data Display .
2. Select Config Watch List from the menu.
3. Press the SEL button and a table of data types appears.
4. Check the boxes next to the data types you want to view in the ANC Data
Inspector. Use the SELECT ALL and CLEAR ALL boxes to quickly select
or clear all data types.
5. When you are finished selecting the data types, navigate to the Return box
and press the SEL button.
6. Press the CONFIG button to dismiss the menu.
7. Press and hold the MEAS button and select Display Type and then ANC
Data Display from the pop-up menu.
You can now view the data types you checked in the Watch List.
Arrowhead display
The Arrowhead display is a Tektronix proprietary display that shows gamut
violations of the SDI input if translated into the Composite domain (NTSC and
PAL). For more information about using the gamut-checking displays:
■ See Diamond display on page 90
■ See Split Diamond display on page 106
■ See Checking gamut on page 201
■ See the Preventing Illegal Colors application note available on the Tektronix
Web site (www.tektronix.com)
To access the
Arrowhead display
1. Press and hold the GAMUT button to open the Gamut pop-up menu.
2. Use the arrow keys to select Display Type > Arrowhead .
3. Press the GAMUT button to close the pop-up menu.
Display modes
WFM2300 and WFM2200A Waveform Monitors User Manual 51