Installation
North America only.
The following instrument con
fi
guration option is available
only in North America.
E1
: Instrument with oven-controlled crystal oscillator (OCXO) time-base
and GPIB interface.
Software options
You can add the following software options to your generator:
Option VM00: Basic vector modulation package with internal 6M Hz
modulation bandwidth
Option VM01: GSM modulation (requires Option VM00)
Option VM02: GSM EDGE modulation (requires Option VM00)
Option VM03: W-CDMA modulation (requires Option VM00)
Option VM04: APCO-25 modulation (requires Option VM00)
Option VM05: DECT modulation (requires Option VM00)
Option VM06: NADC modulation (requires Option VM00)
Option VM07: PDC modulation (requires Option VM00)
Option VM08: TETRA modulation (requires Option VM00)
Option VM10: Audio clip (analog AM and FM) (requires Option VM00)
Option EIQ; External 200 MHz modulation bandwidth (requires Option
VM00)
Connect to a network
You can communicate with or remotely control your instrument through the LAN,
RS232, or GPIB interfaces. (GPIB requires Option GPIB.)
LAN interface
The LAN connector may be used to connect the instrument to a 10/100 Base-T
Ethernet LAN. Before connecting the instrument to your LAN, check with your
network administrator for the proper method of con
fi
guration of instruments
on your network.
To set up the LAN interface:
1.
Connect a LAN cable to the rear panel LAN port.
2.
Press the
Utility
button from the main menu.
3.
Select
I/O Interface
.
4.
Select
LAN
to view the Ethernet network settings.
TSG4100A Series RF Signal Generators User Manual
3
